Neobotics Foundation Inc.
Get on the carNEORACER DOCS
NEORACER DOCS
These docs are public and open source.Edit on GitHub
GETTING STARTED / GET ON THE CAR

GET ON THE CAR.

A brand new NeoRacer needs a network setup first. Here's how you do it, step by step.

01 / ATTACH THE ANTENNAS

THE WI-FI ANTENNAS.

The Jetson's Wi-Fi card sits on its underside, so the two antenna leads are reached from below.

  • Power the car off before you unmount the Jetson.
  • Unscrew the Jetson from its 3D-printed chassis mount to reach the Wi-Fi card underneath.
  • Press each of the two antenna connectors onto its socket on the card until it clicks.
  • Screw the Jetson back onto its mount and route the antennas clear of the wheels and belt.
02 / PLUG IN A CONSOLE

MONITOR AND KEYBOARD.

Connect a monitor to the Jetson's DisplayPort or HDMI output and a USB keyboard and mouse. Power the car on and log in as racecar (password neobotics).

03 / GET THE CAR ONLINE

INTERNET FIRST.

The install on the next page needs internet. Either works:

  • Join your Wi-Fi. Open the network menu in the top-right of the desktop and join any Wi-Fi with internet.
  • Or plug in Ethernet. Connect a cable with internet to the Jetson's RJ45 port, then switch Wired on in the same network menu.